Usb audio driver for pie12/28/2022 ⑤ Preset Modes Set stereo width, equalization, and compression for specific applications. Or tap the Save button to save current settings. ④ Custom Presets Tap the caret to quickly access your saved presets. ③ Microphone Gain Adjust the mic gain slider to set the volume of the sound source. The loudest peaks should reach within the target range (indicated by the shaded region between -12 and -3 dB). ② Input Meter Displays the strength of the input signal and whether that signal is mono or stereo. When mic settings are Locked, the setting screen is grayed out. Note: Lock the settings to prevent accidental changes to settings when handling your device during recording. Tap the lock to lock or unlock the settings. Tap the headphone icon to access direct monitoring control. The charms show which advanced features are on. A red flashing dot next to the name let you know whether recording is active. ① Notifications The top row displays which device is connected. Note: Do not use the gain adjustment to get more volume from the headphones. Pressing the headphone button changes to volume control slider to adjust the headphone volume (LEDs switch from green to orange when adjusting headphone volume). Plug in headphones to monitor the real-time audio and playback.Note: When using the MVi, you can monitor and listen to playback through the device headphone output. Refer to the "Adjusting Microphone Level" topic in this guide for more details. If the audio is too quiet or causes distortion, adjust the gain manually. Use the MODE button to select the preset mode that fits your application and adjust the microphone gain to suit the application.The PH PWR LED on the rear panel illuminates when phantom power is activated.Ĭaution: Never activate phantom power if using a ribbon microphone, as this may cause damage to the microphone. To turn on phantom power, press and hold the mute button for 3 seconds. Note: Condenser microphones require phantom power to operate. The XLR/TRS combo input is compatible with microphones, guitars, instruments, and other line-level sources. Plug a microphone or instrument into the input on the rear panel.Open the Shure MVi driver from the sound control panel and raise the headphone volume from the playback or output tab. Adjust the headphone volume on the MVi device driver.If MVi is not the selected audio device, open the sound control panel and select the Shure MVi driver. The MVi is automatically assigned as the active audio device.The touch panel illuminates to indicate a successful connection. Use the appropriate cable (USB or Lightning).ĭrivers will be installed automatically. Connect the MVi to a computer or mobile device.The MVi is compatible with most devices that have a USB or Lightning connector.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |